加工定制:否 | 品牌:PTL | 型号:请联系卖家 |
分辨率:1 | 尺寸(mm):1 | 测量精度:1 |
测量范围:1 | 用途:1 | 电源:1 |
用于检查保护以防止进水来证明的二个特征数字5“受保护的对喷射水柱”或6“保护与强大的水射流”的防护等级
参照标准:
IEC 60034-5 / 1991-01&9.1 Table IV Fig. 6,
IEC 60529 / 1989-11 &14.1 Table VIII Fig. 6,
IEC 60598-1 / 1999-02&9.2.6Fig. 8,
IEC 60947-1 / 1999-02&C.14.1,
EN 60335-1 / 1994 + A11 / 1995&15.1.1,
EN 60950 / 1992 + modifications up to 1997 An. T, DIN 40 050 Part 9 / 1993-05 ?7.4 Table 8 Fig. 6,
VDE 0570 Part 1 / 1998-07 &17.1.1, VDE 0632 Part 1 / 1996-04&15.2.3
Standard outfit:
1 nozzle element with knurling,
1 handle, internal diameter approx. 16 mm, handle sleeve of plastic,
1 flow meter, almost independent of position,
1 flow control and stop valve with hand-
wheel to adjust the water flow, with spout for hose of nominal width 19 mm (3/4"),
1 hose, nominal width 19 mm (3/4"), 5 m long, with 2 hose clamps.
Design: nozzle element and tube within the handle of stainless steel, valve nickel-plated,
nozzle for degree measuring range Article
diameter: of protection: of flow meter: No.:
6,3 mm 5 11,5 - 12,5 - 13,5 l/min P 03.26
12,5 mm 6 90 - 100 - 110 l/min P 03.28
Spare parts:
Nozzle element, with knurling:
nozzle for degree Article
diameter: of protection: No.:
6,3 mm 5 P 03.58
12,5 mm 6 P 03.59
Hose, high quality, nominal width 19 mm (3/4"), 5 m long, with 2 hose clamps,
Article No.: P 03.68